Gasification reactors, due to their harsh process conditions, place high demands on the instruments used there. Many manufacturers have reacted to this and adapted their products correspondingly. But what are the optimisation possibilities for thermocouples for use …
The positive material identification test - PMI test - serves as a proof of the alloying constituents present in the material, confirming the melting analysis of the material contained in the 3.1 certificate. There are two different test procedures common for …
In order to avoid any damage to the thermowell during operation due to mechanical loads, a thermowell calculation per ASME PTC 19.3 TW-2016 is recommended for critical process conditions. In case of a calculation with negative results, the only constructive solution so …
